|
Floorstander - CRITERION TAL X2.1
|
|
|
|
The TAL X2.1 is a refined development of the two-way principle. It performs the artifice of combining the delightful tonal and spatial qualities of a compact two-way loudspeaker with the extended bass and low-frequency dynamics of a large floor-standing unit. As in all TAL models and the TCI 3R the TAL X2.1 is fitted with the further developed super annular high-frequency unit. In the mid / bass range we use a 17 cm pressure-cast aluminium chassis with its ultra-stiff, feather-light aluminium cone and phase plug in a two-way arrangement. A second 17 cm driver with a bone-hard carbon fibre cone is also fitted, but this unit only radiates the low frequencies, working in parallel with the bass / mid-range unit inside the sophisticated transmission line cabinet. |
|
The net result is enormous dynamic range and precision in the bass range, characteristic of our transmission absorber lines, combined with a very low bottom limit frequency and a superb ability to handle high levels. Massive bi-amping terminals, an extremely low-loss crossover unit with a new kind of low-saturation, low-distortion coil, the cabinet with its complex damping and stiffening measures and a range of perfect surface finishes make this compact floor-standing speaker a genuine high-flyer. |
|
|
top |
|
|
Principle |
2 – way – transmisionline floor stander |
|
Nominal power rating |
130 Watt |
|
Music power rating |
170 Watt |
|
Impedance |
4 Ohm |
|
Frequency response |
32 – 45000 Hz |
|
Sensitivity 90 dB/1 m |
2,3 Watt |
|
Bass drive unit |
1 x 170 mm |
|
Midrange drive unit |
1 x 170 mm |
|
High-frequency drive unit |
1 x 35 mm |
|
Crossover unit, type |
FSR |
|
Bi-amping |
yes |
|
Dimensions H x W x D |
90 x 22 x 33 cm |
|
Weight |
23 kg |
|
Colours |
rubbed black lacquer, silber lacquer, natural alder, natural maple, non-standard wood (extra cost option) |
|
top |
|
| We reserve the right to alter technical specifications | |